TRENDnet TEW-824DRU, Руководство пользователя

Страница: 44 / 72

© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-824DRU
41
Block all services
1. Log into your router management page (see “ Access your router management page ”
on page 9).
2. Click on Advanced and click on Security, then click on Access Control .
3. Next to Enable Access Control , click the Enable option.
4. Review the Add All Services Block Rule . Click Add to save the rule.

Rule Enable – Checking this option turns on the Protocol/IP Filter and
unchecking turns it off.

Rule Name – Enter a name for the Protocol/IP Filter.

Schedule (Optional) – The schedule function allows you to define a schedule
when the access control filter should be turned on. To define a new schedule,
click
New Schedule and refer to page 39 “ Create Schedules ”. After you have
created a new schedule, click the drop-down list and the new schedule will be
available for selection.
Note: Before applying scheduling, please ensure your
Time settings are configured correct and you have defined a schedule. See page
38 to configure
Time Settings and see page 39 “ Create Schedules ” to create a
schedule.

Client IP Address Range – Enter the IP address or IP address range to apply the
protocol/IP filter. (e.g. 192.168.10.20-192.168.10.20 or 192.168.10.20-
192.168.10.30) .
Note: The filter will not be applied to IP addresses outside of the range specified.
Note: In the Block Rule List , you can edit a rule by clicking under the Edit column
next to the rule you would like to edit. You can also delete a rule by clicking under
the Delete column next to the rule you would like to delete.
Inbound Filter
Advanced > Security > Inbound Filter
Inbound Filters allows you to allow or deny a specific range of IP addresses. You can
create a predefined range of IP addresses to apply to a specific feature.
Note: You can apply a predefined inbound filter to the following features:

Virtual Server

Gaming

Remote Management
1. Log into your router management page (see “ Access your router management page ”
on page 9).
2. Click on Access , and click on Inbound Filter .
3. Review the inbound filter settings. Click Add to save the Inbound Filter.

Filter Name – Enter a name for the IP address range.

Filter Action – Select Allow to allow the specified IP address range or Deny to
deny the specified IP address range.

IP Address - Enter the IP address (e.g. 192.168.1.20-192.168.1.30) .
Note: In the Inbound Filter List , you can edit a rule by clicking under the Edit
column next to the rule you would like to edit. You can also delete a rule by clicking
under the Delete column next to the rule you would like to delete.