TRENDnet TEW-816DRM, Руководство пользователя

Страница: 29 / 61

© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-723BRM
26

Secondary IP: Click to enable option to configure a secondary IP Address and
Subnet Mask

IP Address: Enter the second IP address

Subnet Mask: Enter the subnet mask to assign. (e.g. 255.255.255.0 )
Note: The DHCP address range will change automatically to your new router IP
address settings so you do not have to change the DHCP address range manually to
match your new router IP address settings.
Set up the DHCP server on your router
Setup > Local Network> DHCP Server
Your router can be used as a DHCP (Dynamic Host Configuration Protocol) server to
automatically assign an IP address to each computer or device on your network. The
DHCP server is enabled by default on your router. If you already have a DHCP server on
your network, or if you do not want to use your router as a DHCP server, you can disable
this setting. It is recommended to leave this setting enabled.
1. Log into your router management page (see “ Access your router management page ”
on page 23).
2. Click on Setup , hover over Local Network and click on DHCP Server .
3. Review the DHCP Server settings.

DHCP Mode: Select the mode you wish to enable.
o
DHCP Relay: Select this option to enable
o
DHCP Server: Select this option to enable

Relay Server: Enter the your assigned DHCP relay IP address

DHCP Option: Select the DHCP mode of your modem router. If you set the DHCP
Option to DHCP Server, configure the following settings:
Note: If you set your modem router as the DHCP server, your modem router will
automatically assign an IP address to each computer on your network. By default,
the fields for DHCP settings have predefined values. It is recommended to retain
these values unless specified by your ISP.

IP Pool Range: Enter the range of IP address to assign. The default value is
192.168.10.101 to 192.168.10.199.

Max Lease Time: Enter the lease time in seconds. The lease time is the amount of
time a device is allowed connection to your modem router using its current
dynamic IP address. At the end of the lease time, the lease is either renewed or a
new IP address is assigned. The default value is 1440 minutes (1 day).

Domain Name : Enter the domain name to connect to

DNS Server : Enter the preferred and alternate DNS IP addresses.
Assign specific IP address to clients
Setup > Local Network > DHCP Reserved
Clients connect to your router can be assigned specific IP addresses instead of pulling
DHCP from the router.
DHCP Reservation
1. Log into your router management page (see “ Access your router management page ”
on page 23).
2. Click on Setup , hover over Local Network and click on DHCP Reserved .
3. Review the DHCP Server settings.

IP Address: Enter the IP assigned IP address

MAC Address: Enter the MAC address of the computer of client.