© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-723BRM
12
Personal (Pre-Shared Key):
Selecting this option allows a pre-shared key to be
setup as the security feature.
Select the
Pre-Shared Key Format.
Passphrase:
A password or key that is used to connect your computer to this
modem router wirelessly
Hex:
A password or key using only HEX characters
Create your Wireless security pre-shared key (password or key):
Pre-share Key:
Enter the pre-shared key.
This is the password or key that is used to connect your computer to this
modem router wirelessly
Note:
8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.)
If
Enterprise (RADIUS)
is selected in the above Authentication Mode, input the RADIUS
Server location in the provided fields.
o
IP address:
Enter the IP address of the RADIUS server. (e.g.
192.168.10.250)
o
Port:
Enter the port your RADIUS server is configured to use for RADIUS
authentication.
Note:
It is recommended to use port 1812.
o
Password:
Enter the shared key (or shared secret) used to authorize your modem
router with your RADIUS server.
Connect wireless devices to your modem router
A variety of wireless network devices can connect to your wireless network such as:
Gaming Consoles
Internet enabled TVs
Network media players
Smart Phones
Wireless Laptop computers
Wireless IP cameras
Each device may have its own software utility for searching and connecting to available
wireless networks, therefore, you must refer to the User’s Manual/Guide of your
wireless client device to determine how to search and connect to this modem router
’s
wireless network.
See the “Appendix” on
page 59
for general information on connecting to a wireless
network.
Connect wireless devices using WPS
Advanced Wireless > WPS
WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your
wireless network. If your wireless devices support WPS, you can use this feature to
easily add wireless devices to your network.
Note:
You will not be able to use WPS if you set the SSID Broadcast setting to Disabled.
There are two methods the WPS feature can easily connect your wireless devices to
your network.
Push Button Configuration (PBC) method
o
RECOMMENDED Hardware Push Button method
–
with an external button located
physically on your modem router and on your client device
o
WPS Software/Virtual Push Button - located in modem router management page
PIN (Personal Identification Number) Method - located in modem router management
page
Note:
Refer to your wireless device documentation for details on the operation of
WPS.
Recommended Hardware Push Button (PBC) Method
Note:
it is recommended that a wireless key (passphrase or password) is created
before connecting clients using the PBC method. If no wireless key is defined when
connecting via PBC, the modem router will automatically create an encryption key
that is 64 characters long. This 64 character key will then have to be used if one has
to connect computers to the modem router using the traditional connection
method.
To add a wireless device to your network, simply push the WPS button on the wireless
device you are connecting (consult client device
User’s Guide for length of time)
, then
push and hold the WPS button located on your modem router for 3 seconds and release
it. The WLAN LED on your modem router will flash rapidly indicating that the WPS setup
process has been activated. (See “
Product Hardware Features
” on
page 2
)
For connecting additional WPS supported devices, repeat this process for each
additional device.
Содержание TEW-816DRM
Страница 1: ...TRENDnet User s Guide Cover Page...
Страница 61: ......
