background image

 

 

 

 

 

 

 

 

 

 

© Copyright 2013 TRENDnet. All Rights Reserved. 

 

 

 

16

 

 
TRENDnet User’s Guide

 

TEW-805UB 

Federal Communication Commission Interference Statement 

This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide 

reasonable protection against harmful interference in a residential installation. This 

equipment generates, uses and can radiate radio frequency energy and, if not installed 

and used in accordance with the instructions, may cause harmful interference to radio 

communications.  However, there is no guarantee that interference will not occur in a 

particular installation.  If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and on, the 

user is encouraged to try to correct the interference by one of the following measures: 
-Reorient or relocate the receiving antenna. 
-Increase the separation between the equipment and receiver. 
-Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 
-Consult the dealer or an experienced radio/TV technician for help. 
FCC Caution: Any changes or modifications not expressly approved by the party 

responsible for compliance could void the user's authority to operate this equipment. 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 

two conditions: (1) This device may not cause harmful interference, and (2) this device 

must accept any interference received, including interference that may cause undesired 

operation. 
Operations in the 5.15-5.25GHz band are restricted to indoor usage only. 

IMPORTANT NOTE: 

Radiation Exposure Statement: 
This device meets the government

s requirements for exposure to radio waves. 

This device is designed and manufactured not to exceed the emission limits for exposure 

to radio frequency (RF) energy set by the Federal Communications Commission of the 

U.S. Government.   
The exposure standard for wireless device employs a unit of measurement known as the 

Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR 

are conducted using standard operating positions accepted by the FCC with the device 

transmitting at its highest certified power level in all tested frequency bands. 
 

This transmitter must not be co-located or operating in conjunction with any other 

antenna or transmitter. 
The USB dongle transmitter is approved for use in typical laptop computers.  To comply 

with FCC RF exposure requirements, it should not be used in other devices or certain 

laptop and tablet computer configurations where the USB connectors on the host 

computer are unable to provide or ensure the necessary operating configurations 

intended for the device and its users or bystanders to satisfy RF exposure compliance 

requirements.    
Note: The country code selection is for non-US model only and is not available to all US 

model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation 

channels only. 

 
For Taiwan 

警語:

 

經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變
更頻率、加大功率或變更原設計之特性及功能。

 

低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,
應立即停用,並改善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作
業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射
性電機設備之干擾。

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание TEW-805UB























Отзывы: