TRENDnet TEW-805UB, Быстрое руководство по установке

Страница: 7 / 22

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-805UB
5
• Add: Adds a profile. The following screen will appear. The user can enter the
necessary information required for accessing the particular Access Point or Wireless
Router. Or you can search the desire wireless router or AP under Available Networks
section and click on Add Profile button to add the Profile.
• Remove: Deletes the selected profile
• Edit: Edit an exist profile. The screen will back to profile. Edit the SSID and select the
Wireless Mode, Authentication and Encryption then click Apply to save the profile.
When the Profile name was changed, a new profile will be added in the list.
•
Duplicate: Duplicate the selected Profile.
• Set Default: Set the selected Profile as default connection.
When adding a new profile the below screen will appear. This screen will allow you to
set the wireless encryption settings from your wireless network to the wireless adapter.
Wireless Network Security: The following options are available: Open System, Shared
Key, WPA-PSK, WPA2-PSK, WPA EAP-TLS, WPA2 EPA-TLS . Select Open System, Shared
Key for WEP data encryption feature.
o
Open System and Shared: Requires the user to set a WEP key to exchange data
with other wireless clients that have the same WEP key. WEP is considered basic
level of wireless encryption, if you would like higher security connection, WPA2
encryption is recommended.
 Default Key: select one of the 4 keys to use.

Network Key: choose the encryption way, either in HEX or ASCII formats, and
enter the password in the blank space.

Key Length: select 64 or 128 bits as the length of the keys
Key Format: HEX or ASCII
Key Length Hex ASCII
Type characters 0-9, A-F, a-f alphanumeric
format
64-bit 10 characters 5 characters
128-bit 26 characters 13 characters
o
WPA-PSK/WPA2-PSK: Requires the user to use a passphrase as the encryption key,
with a minimum length of 8 characters long or maximum of 64 characters long.
Please select the cipher of TKIP or AES then enter the Passphrase key. AES cipher
type is for WPA2 and TKIP is for WPA.
o
WPA/WPA2 EAP-TLS : Also known as RADIUS or Enterprise requires the user to have
a radius server connected to their network for wireless authentication and a
password. Please select the cipher of TKIP or AES then enter the Passphrase key.
AES cipher type is for WPA2 and TKIP is for WPA. Then select the
WPA/WPA2
Certificate
from drop down list.