TRENDnet TEW-721BRM, Руководство пользователя, Страница: 23 / 64

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-721BRM
20
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced , click on Firewall , and click on Domain Filter .
3. Under Domain blocking section select Enable.
4. Enter the website URL to block and click Add. Select the time schedule of when to
enable the rule or select Always to always block entry.
IP Filtering
Advanced > Firewall > IP Filter
You may want to block computers or devices on your network access to your network
using IP address.
1. Log into your router management page (see “Access your router management page”
on page 22 ).
2. Click on Advanced , click on Firewall , and click on URL Filter .
3. Click Add to enter settings.
4. Review the settings and click Apply to save settings.

Enable: Check to enable rule.

Filter Name: Enter the name of the IP filter rule.

Start/End Destination IP Address: Enter the starting and ending points of the
source IP address to filer.

Source/Destinatioin Port: Enter the source and destination ports of the filter IP
address.

Protocol Type: Select the protocol to filter of the IP address.

Schedule: Select the schedule to apply the IP filter rule or select Always.
Packet Filters
You may want specify inbound or outbound access control to allow/deny sources (or
Internet IP addresses) to your network from the Internet or from computers or devices
on your network to the Internet. Firewall rules may allow for more granular control of
specific inbound and outbound access between your network and the Internet. It is
recommended that these settings remain set to default unless you are knowledgeable
about the effects of changing the firewall rule configuration. It is possible to have
undesirable functionality from your router if these settings are improperly modified.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced and click on Packet Filter .