TRENDnet TEW-716BRG Скачать руководство пользователя страница 30

Страница: 30 / 43

TRENDnet User’s Guide

TEW-716BRG

Upgrade your router firmware

Toolbox > Firmware Upgrade

TRENDnet may periodically release firmware upgrades that may add features or fix

problems associated with your TRENDnet router model and version. To check if there is

a firmware upgrade available for your device, please check your TRENDnet model and

version using the link.

http://www.trendnet.com/downloads/

In addition, it is also important to verify if the latest firmware version is newer than the

one your router is currently running. To identify the firmware that is currently loaded on

your router, log in to the router, click on the Status tab and then on the Device

Information sub-tab. The firmware used by the router is listed at the top of this page. If

there is a newer version available, also review the release notes to check if there were

any new features you may want or if any problems were fixed that you may have been

experiencing.

1. If a firmware upgrade is available, download the firmware to your computer.
2. Unzip the file to a folder on your computer.

Please note the following:

•

Do not interrupt the firmware upgrade process. Do not turn off the device or

press the Reset button during the upgrade.

•

If you are upgrade the firmware using a laptop computer, ensure that the laptop

is connected to a power source or ensure that the battery is fully charged.

•

Disable sleep mode on your computer as this may interrupt the firmware upgrade

process.

•

Do not upgrade the firmware using a wireless connection, only using a wired

network connection.

•

Any interruptions during the firmware upgrade process may permanently

damage your router.

1. Log into your router management page (see “

Access your router management page

”

on page 18).
2. Click on

Toolbox

and click on

Firmware Upgrade

3. Click on

Browse

Choose File

and click

Upgrade

to restore settings.

Restart your router

Toolbox > Reboot

You may want to restart your router if you are encountering difficulties with your router

and have attempted all other troubleshooting.
There are two methods that can be used to restart your router.

•

Turn the router off

for 10 seconds using the router On/Off switch located on the

rear panel of your router, see “

Product Hardware Features

” on page 4.

Note:

Use this method if you are encountering difficulties with accessing your

router management page. This is also known as a hard reboot or power cycle.

•

Router Management Page

– This is also known as a soft reboot or restart.

1. Log into your router management page (see “

Access your router management page

”

on page 18).
2. Click on

Toolbox

and click on

Reboot

Содержание TEW-716BRG











































Результаты поиска

Содержание TEW-716BRG

Отзывы:

Бренды по названию

Популярные бренды

TRENDnet TEW-716BRG, Руководство пользователя

Результаты поиска

Содержание TEW-716BRG

Отзывы:

Бренды по названию

Популярные бренды