Stackable NWay Ethernet Switch User’s Guide
Using the Console Interface
65
The top of the screen displays the current settings for
Console
Timeout
and
Serial Port
as well as the
Baud Rate
,
Character Size
, and
Stop Bit
for Out of Band and Console
settings, respectively.
Configure Switch Stack
The
Switch Stack Configuration
screen shows various pieces of
information about your Switch, and allows you to set the
System
Name
,
System Location
, and
System Contact
. These settings
can be retrieved from the Switch using SNMP requests, allowing
these settings to be used for network management purposes.
Choose
Configure Switch Stack
to access the second item on the
System
Configuration
menu. The following screen appears:
Figure 6-10. Switch Stack Configuration screen
The fields you can set are:
? ?
System Name
Corresponds to the SNMP MIB II variable
system.sysName
, and is used to give a name to the Switch
for administrative purposes. The Switch’s fully qualified
Содержание TEG-S224 Series
Страница 14: ......