manualshive.com logo in svg

TRENDnet TEG-S224 Series, Руководство пользователя, Страница: 145 / 206

Поделиться
Скачать
TRENDnet TEG-S224 Series Скачать руководство пользователя страница 145

Stackable NWay Etherne t Switch User’s Guide  

Web-Based Network Management 

131 

 

? ?

Anchor

  The Anchor port for the trunk group. All configuration 

settings changes made to the anchor port will automatically be 
made to the other ports in the trunk. 

? ?

Name

  The user-assigned name of the trunk group. 

? ?

Members

  The continuous number of ports that will be 

members of the trunk group. 

? ?

State

  Allows the trunk group to be 

Enabled

 or 

Disabled

. 

? ?

Switch  

This field allows you to select the desired Switch.

  

 

Port Mirroring 

 

 

Figure 7-7.  Port Mirroring window 

The Switch allows you to copy frames transmitted and received on a 
port and redirect the copies to another port. You can attach a 
monitoring device to the mirrored port, such as a sniffer or an RMON 

Содержание TEG-S224 Series















































































































































































































Отзывы:

Нет отзывов