TRENDnet TEG-3102WS Скачать руководство пользователя страница 78 | Manualshive

Страница: 78 / 95

background image

© Copyright 2022 TRENDnet. All Rights Reserved.

73

TRENDnet User’s Guide

Multi-Gig Web Smart Switch Series

Tools

Firmware Upgrade

Upgrade your switch’s firmware

Tools > Firmware Upgrade

TRENDnet may periodically release firmware upgrades that may add features or fix
problems associated with your TRENDnet switch model and version. To check if there is
a firmware upgrade available for your device, please check your TRENDnet model and
version using the link. http://www.trendnet.com/downloads/

In addition, it is also important to verify if the latest firmware version is newer than the
one your switch is currently running. To identify the firmware that is currently loaded on
your switch, log in to the switch, click on the System Info section or click on Tools and
click on Firmware Upgrade. The firmware used by the switch is listed as Runtime Image
or Image Version. If there is a newer version available, also review the release notes to
check if there were any new features you may want or if any problems were fixed that
you may have been experiencing.

1. If a firmware upgrade is available, download the firmware to your computer.

2. Unzip the file to a folder on your computer.

Please note the following:

•

Do not interrupt the firmware upgrade process. Do not turn off the device or
press the Reset button during the upgrade.

•

If you are upgrade the firmware using a laptop computer, ensure that the laptop
is connected to a power source or ensure that the battery is fully charged.

•

Disable sleep mode on your computer as this may interrupt the firmware upgrade
process.

•

Do not upgrade the firmware using a wireless connection, only using a wired
network connection.

•

Any interruptions during the firmware upgrade process may permanently
damage your switch.

Firmware Upgrade via HTTP Settings

Tools > Firmware > Firmware Upgrade

1. Log into your switch

management page (see “

Access your switch management page

on page 5).

2. Click on

Tools

, click on

Firmware

, and click on

Firmware Upgrade

.

3. Select the firmware

Upgrade Method

(HTTPS or TFTP).

4. Select the

Image

you would like to upgrade to.

5. Select the location of the file by clicking

Select file.

6. Navigate to the folder on your computer where the unzipped firmware file (

.imag

) is

located and select it.

5. Click

Apply

. If prompted, click

Yes

or

OK

.

Firmware Upgrade via TFTP Settings

Tools > Firmware Upgrade

Note:

Before using this method, you will require a TFTP server. There are third party

TFTP server applications available for this function. If you are not familiar with the TFTP
protocol, it is recommended to use the HTTP method.

«
...
76
77
78
79
80
...
»

Содержание TEG-3102WS
































































































Отзывы:

Нет отзывов

Похожие инструкции для TEG-3102WS

Бренд: D-Link Страницы: 2

IPS7110-2GC-8POE

Бренд: 3One data Страницы: 3

Бренд: Qlogic Страницы: 135

SANbox2 SANbox2-64

Бренд: Qlogic Страницы: 224

Бренд: K-Dyne Страницы: 10

Бренд: Inline Страницы: 26

LMP-1204G-SFP Series

Бренд: ANTAIRA Страницы: 20

Бренд: Xantech Страницы: 4

ET2-0602-M Series

Бренд: Leonton Страницы: 17

Бренд: AbleNet Страницы: 12

BONANZA ACCU-SIM V35B

Бренд: A2A Simulations Страницы: 112

FRIENDLYNET FS4116R

Бренд: Asante Страницы: 6

SICOM3028GP Series

Бренд: KYLAND Technology Страницы: 40

Бренд: FIBERROAD Страницы: 30

Бренд: Xantech Страницы: 32

SMT-8-...-B Series

Бренд: Festo Страницы: 2

Бренд: Linksys Страницы: 22

Бренд: CityGrow Systems Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды