TRENDnet TE100-PS1, Руководство по оборудованию, Страница: 16 / 20

Ether-P401 Print Server Hardware Guide
10
Unpacking and Installation
Started Setting up Your Print Server" section, under the heading
"Testing your Print Server").
Velcro-mounting the TE100-PS1
The TE100-PS1 can stand on the printer's tabletop, or may be
Velcro-mounted to a side panel of the printer or another suitable
surface next to the printer. To prepare for Velcro-mounting,
separate the two parts of the supplied Velcro tape (pull the "hook"
tape apart from the "loop" tape -- the hook tape has stiff little
plastic hooks, which give its surface a rough feel, and the loop tape
has a mat of soft plastic filaments which gives it a smooth, soft
feel).
The bottom housing of the TE100-PS1 case features two corner
markers which indicate the best location for applying the Velcro
loop tape. Peel the white backing off of the loop tape, to expose its
adhesive surface, and press it onto the bottom of the TE100-PS1,
between the corner markers.
Choose a mounting surface, and mounting attitude, which will
afford convenient visual access to the TE100-PS1's LED indicators,
without cramping any of the wiring connected to the TE100-PS1's
rear panel. Peel the white backing off of the hook tape. Align the
hook tape to match the alignment of the loop tape when the
TE100-PS1 is in the attitude you have chosen, and press the loop
tape's adhesive back onto the mounting surface.
Mount the TE100-PS1 by pressing its case firmly against the
mounting surface to engage the hooks and loops of the Velcro
tapes.