TRENDnet TE100-PS1, Руководство по оборудованию, Страница: 13 / 20

Ether-P401 Print Server Hardware Guide
Unpacking and Installation
7
Installing the TE100-PS1
Follow these steps for a trouble-free start of print-server
operations with your TE100-PS1. Please take particular notice of
the warning in step 4: the network connection should be made
before supplying power to the TE100-PS1.
1. Confirm proper operation of the printer to be connected to the
TE100-PS1.
2. When you have confirmed proper operation of the printer,
switch its power off.
3. Confirm that your network is operating normally.
4. Connect the TE100-PS1 to the network (through the RJ-45
receptacle on the print server rear panel).
WARNING: Configuration problems may result if the TE100-PS1
is powered up without first establishing its network
connection. Follow this procedure to avoid
complications at the configuration stage.
5. While the printer is power off, install a printer cable to connect
its parallel port to the printer port of the TE100-PS1.
6. Switch printer power on.
7. Plug the DC power adapter output plug into the DC power
input socket on the rear panel of the TE100-PS1
8. Plug the DC power adapter into an electric service outlet. This
will supply power to the TE100-PS1 (The TE100-PS1 has no
power switch.) The TE100-PS1 self-test routines will proceed
automatically.