TRENDnet TE100-PS1, Руководство по оборудованию, Страница: 15 / 20

Ether-P401 Print Server Hardware Guide
Unpacking and Installation
9
LPT Flash Pattern Error Type
steady long flashes Firmware Reload Required
continuous on DRAM Error
One long, two short flashes Timer INT Error
One long, three short flashes Flash Protected
One long, four short flashes Flash ID Error
One long, five short flashes
Flash Erase / Program Error
One long, six short flashes
LAN Controller Error
One long, seven short flashes LAN Memory Error
One long, eight short flashes Parallel Controller Error
One long, nine short flashes LPT Error
steady short flashes EEPROM Error
One long, eleven short flashes LAN I/O Base error
In the event of a Firmware Reload Required error at startup,
proceed according to instructions given in the
Print Server
Administration User’s Guide (" TRENDnet EtherPort Admin
Administration" section, under the heading "Upgrading the Print
Server's Internal Firmware").
In the event that any of the other listed error conditions is
encountered on startup, contact your dealer for correction of the
fault.
Operational Test
The TRENDnet EtherPort Admin software includes a Print Test
function for confirmation of connections and functions. That
operational test can be performed after you have completed
installation of the
EtherPort Admin software, and the EtherPort
Admin procedures for configuring the TE100-PS1. See
instructions given in the EtherPort Admin User’s Guide ("Getting