41
LAN
Check/un-check the services on the LAN column to allow/un-allow the services
access from LAN side; and “WAN”:
WAN
Check/un-check the services on the WAN column to allow/un-allow the services
access from WAN side.
WAN Port
This field allows the user to specify the port of the corresponding service. Take the
HTTP service for example; when it is changed to 8080, the HTTP server address for
the WAN side is
http://dsl_addr:8080
, where the dsl_addr is the WAN side IP
address of the DSL device.
Function buttons in this page:
Apply Changes
Save configuration to system.
IP Pass Through:
Although the Router mode is capable of terminating the PPP in the modem and
hence does not require PPPoE client software on the host PC, there are some disadvantages to Router mode
when only single-user support is required. For instance, Router mode uses NAT which requires ALG support.
IP Pass Through
also terminates the PPP in the modem and does not require a PPPoE client on the PC.
However,
IP Pass Through
does not use NAT and is not limited by ALGs.
IP Pass Through
will work with
Ethernet interface to the PC.
When
IP Pass Through
is enabled, only one PC is able to access the Internet, and the DHCP server will
duplicate the WAN IP address from the ISP to the local client PC. Only the PC with the WAN IP address can
access the Internet.
Fields in this page:
Field
Description
IP PassThrough
Select the WAN connection profile from the drop down manual on which the rule will
take effect.
Lease Time
The Lease time is the amount of time a network user will be allowed to connect with
DHCP server.
Others