I206 V.92 PCI MODEM USER’S MANUAL
Rev.1.00.2.1.57.75
- 7 -
Section 2.3.3
Setup instructions for Windows Me
STEP 1.
After you complete the modem hardware installation and turn on your PC, Windows system will
automatically detect your new added devices “
PCI Card
”.
A prompt screen will ask you to select
Automatic search for a better driver
or
Specify the
location of the driver
, so you can select the driver you want.
Please select the
Specify the location of the driver [Advanced]
as shown in figure.
Then click on
Next
.
STEP 2.
And then, a prompt screen will ask you to indicate where your driver is located, floppy disk drives,
CD-ROM drive, Microsoft Windows Update or
specify a location:
.
Insert the
Modem Driver
CD-ROM disk attached with your modem into the CD-ROM drive device,
then select
Specify a location
as shown in figure.
Click
on
Next
.
STEP 3.
Then, a prompt screen indicates Windows has found the best driver for your modem as shown
in
figure.
Please make sure the source of your driver is correct then click on
Next
.
