I206 V.92 PCI MODEM USER’S MANUAL
Rev.1.00.2.1.57.75
- 19 -
Section 2.4
Testing Your Modem
Before you set up your software, start with a quick test to check that your modem is working. Once you have
determined that your modem is setup properly, go on to
Section 2.5 Install Communication Software
to
install your communications software. If you are having problems, see
Section 3 Troubleshooting
.
Click on
Start
and point to
Setting
. Then click on
Control Panel
. When the
Control Panel
window opens.
Scroll down to the
Modem
icon and double click on it. Click on the
Diagnostics
tab and highlight the COM
port for your modem. Then click on
More Info
, your computer will automatically communicate with your new
modem using AT commands and receiving responses from your modem. A list of response means the modem
is setup properly.
Section 2.5
Install Communication Software
You can install the communication software from the CD-ROM disc attached with your new modem. Please
consult the software manual in the CD-ROM disc for the detail of software installation.
You do not have to use the communication software attached with your new modem. The modem was
designed for and tested using a wide range of communications software packages. Many communication
applications identify the modem automatically and configure themselves for the correct operating settings.
Some of the communication applications will ask you to select the type of modem you are using. Select a
Generic Fax class 1 modem
will let you use basic communication and fax functions.