I206 V.92 PCI MODEM USER’S MANUAL
Rev.1.00.2.1.57.75
- 4 -
Section 2.3
System Setup
Section 2.3.1
Setup instructions for Windows 98SE
STEP 1.
After you complete the modem hardware installation and turn on your PC, Windows system will
automatically detect your new added devices. Windows system will then prompt you with an Add
New Hardware Wizard screen as shown in figure.
Then click on
Next
.
STEP 2.
A prompt screen will ask you to select
Search for the best driver for your device
or display a list
of all the drivers in a specific location, so you can select the driver you want.
Please select the recommended one as shown in figure.
Then click on
Next
.
STEP 3.
And then, a prompt screen will ask you to indicate where your driver is located, floppy disk drives,
CD-ROM drive, Microsoft Windows Update or
specify a location:
.
Insert the
Modem Driver
CD-ROM disk attached with your modem into the CD-ROM drive device.
Then select
Specify a location
as shown in figure.
Click
on
Next
.