manualshive.com logo in svg

TrendCommunications AuroraPlus, Руководство пользователя, Страница: 212 / 226

Поделиться
Скачать
TrendCommunications AuroraPlus Скачать руководство пользователя страница 212

Trend 

Aurora

Plus 

User Guide

A4-6

              429850

81

Invalid call reference value

A message with a call reference which is not
currently in use on the user network interface has
been received by the equipment sending the cause.

82

Identified channel does not exist

The equipment sending this cause has received a
request to use a channel not activated on the
interface for a call.

83

A suspended call exists, but this call identity does
not

A call resume has been attempted with a call identity
which differs from that in use for any currently
suspended call(s).

84

Call identity in use

The network has received a call suspended request.
This request contained a call identity (including the
null call identity) which is already in use for a
suspended call within the domain of interfaces over
which this call may be resumed.

85

No call suspended

The network has received a call resume request. This
contained a call identity information element that
does not indicate any suspended call within the
domain of interfaces over which the call may be
resumed.

86

Call having the requested call identity has been
cleared

The network has received a call resume request. This
contained a call identity information element that
once indicated a suspended call; the suspended call
was cleared while suspended (either by network
timeout, or by a remote user).

App04.P65

01/05/01, 09:21

6

Содержание AuroraPlus



































































































































































































































Отзывы:

Нет отзывов