TrendCommunications AuroraPlus Скачать руководство пользователя страница 134

Страница: 134 / 226

Trend

Aurora

Plus

User Guide

5-14

429850

•

Severely Errored Seconds (SES), the number of seconds

of available time containing more than 64 errors.

Available time is the total length of the test minus

unavailable time.

Unavailable time is any period of 10 or more

consecutive seconds, when every second contained
more than 64 errors.

•

Degraded Minutes (DM), the available time in seconds

minus the Severely Errored Seconds are bundled
together as groups of 60 seconds. The groups of 60
seconds are then counted. The number of Degraded
Minutes is the total number of groups that contained
more than 4 errors

Choose

RESULTS

from the Main Menu. If no results are

stored,

Buffer Empty

is displayed.

Use the

SCROLL

key to step through the BERT results.

Chap05.P65

01/05/01, 09:12

Содержание AuroraPlus



































































































































































































































Результаты поиска

Содержание AuroraPlus

Отзывы:

TrendCommunications AuroraPlus, Руководство пользователя, Страница: 134 / 226

Результаты поиска

Содержание AuroraPlus

Отзывы: