T4 - USA
-7-
Fitting and Removing the
Dust Extractor Spout
■
Insert the extractor spout (1) into the base of
the router.
■
Fit the two countersunk headed screws (2)
through holes (A) from beneath and screw-on
into the captivated nuts in the spout.
■
Dismantle in reverse order.
■
The extractor spout is suitable for dust
extractors with a hose diameter of 1
11
⁄
32
”.
ASSEMBLY & ADJUSTMENT
1
2
A
A
1
/
32
”
11
Whenever possible use the
dust extraction spout with a
suitable extractor when routing.
In some instances it may be necessary
to remove the router from the plunge
base to fit the dust spout. Please see
page 14.
MANU-T4-USA v2.0 30/8/07 1:09 pm Page 7
