TREND T3-USA, Руководство по установке, использованию и обслуживанию

Страница: 8 / 22

-7-
Fitting and Removing the
Dust Extractor Spout
■
Insert the extractor spout (1) into the base of
the router.
■
Fit the two countersunk headed screws (2)
from beneath and screw-on into the
captivated nuts in the spout.
■
Dismantle in reverse order.
■
The extractor spout is suitable for dust
extractors with a hose diameter of 1
3
⁄
8”
.
Whenever possible use the
dust extraction spout with a
suitable extractor when
routing.
ASSEMBLY & ADJUSTMENT
1 3/8"
2
1
1
2
6
3
4
5
Fence Assembly
■
Fit the spring washers (1) over the socket
head screw (2) and pass the screw through
the fence (3).
■
Screw the side fence rod (4) onto the screw
and tighten by hand.
■
Use the cut-out in the side of the 17mm
spanner (5) to hold the flat on the rod while
tightening the screw with the hex key (6).
■
Repeat for other rod assembly.
T3 - USA