TREND Lock Jig A, Руководство пользователя

Страница: 9 / 19

Deepening of
mortise with
auger bit and
drill will be
required.
LOCK/JIG/A
-8- -8-
12mm
Choice of Set-ups
Option
1
4
+
+
Heavy duty router with
1
⁄
2
” collet e.g. T10 Router
Router Cutter
Ref. TR37X1/2TC
or C172X1/2TC
or 3/75X1/2TC
overall length 115mm
OR USE
Router Cutter
Ref. TR37MX1/2TC
or C172MX1/2TC
or 3/75MX1/2TC
overall length 100mm
with the following routers:
RYOBI R600, R600(N), RE601
Makita 3612(C)
Skil 1875U1
30mm Guide Bush
Ref. GB30
See page 6 if a
suitable guide bush
is not available
for your router.
Suitable Plunge Router:
Your router should have following
plunge length:
- For 2” deep locks at least 54mm.
- For 2
1
⁄
2
” deep locks at least 66mm.
- Auger bit and drill required for 3”
deep locks for all routers.
Fit sufficient length of the shank
into the collet. Ideally at maximum
plunge, only as much of the cutter
should protrude below the base as
is required to reach the depth of the
mortise.
Do not attempt to increase the
depth of cut by having less than the
optimum length of the cutter’s shank
inserted in the collet of your router.
One Spacer required
with T9/T10/T11 routers.
The guide bush Ref. GB30/A cannot
be used with the jig for internal doors.
For deep body locks over 75mm an
auger bit in a drill needs to be used to
complete the mortise.
Due to the extra long length of this
cutter, extra care should be taken
to avoid damage. The cutter should
be used to plunge rout a series of
overlapping holes. See page 14.
It is recommended that a plunge
router is used.