LOCK/JIG/A
-6-
ACCESSORIES
Please use only Trend original accessories.
Universal Sub-base
Ref. UNIBASE
The Unibase contain screws, a line up bush and pin.
The line up pin and bush ensure exact alignment of
sub-base with the router spindle, when fitted with the
relevant collet.
Fits following router models
Atlas Copco OFSE2000 Bosch GOF 1300ACE, 1600A,
1700ACE
Casals FT2000VCE CMT
CMT1850, 2000,
DeWalt DW624, 625EK, 629 Draper R1900V Elu MOF 131,
177(E)
Felisatti TP246(E), R346EC Festo OF2000E Freud
FT2000E
Hitachi M12V, M12SA, TR12 Metabo OF1612,
OFE1812
Ryobi RE600N, R600N, RE601, R500, R502 Skil
1875U1
Wadkin R500
UNIBASE
Door Stand
Ref. D/STAND/A
Holds door on it’s edge whilst routing hinge recess
and mortise for locks. Maximum weight 50kg and for
doors 32mm to 55mm thick. Allows door to be tilted
back to assist fitting to door frame.
Door Clamp
Ref. D/CLAMP/A
Holds door open in a fixed position whilst drilling and
fitting locks. Ratchet clamp design for doors up to
55mm thick.
Corner Chisel
Ref. C/CHISEL
For square edged lock faceplates. Squares up
rounded corners in one operation with the tap of a
hammer. High speed steel anvil.
Door Lifter
Ref. D/LIFT/A
Foot operated lifter to support door while fitting into
door frame.
30mm Guide Bush
Ref. GB30
Should the correct guide bush not be available to suit your router’s
base, you will need to use the Trend UNIBASE in conjunction with a
30mm guide bush, Ref. GB30 or 16mm guide bush Ref. GB160.
