manualshive.com logo in svg

TREND H/JIG/B, Руководство пользователя, Страница: 18 / 19

Поделиться
Скачать
TREND H/JIG/B Скачать руководство пользователя страница 18

H/JIG/B

QUICK START INSTRUCTIONS

These instructions are provided for those who 

are confident with the router and are already 

familiar with the H/JIG/B.

Setting Up

1.  Fit router cutter and guide bush to router.

2.  Position door with hanging edge    

uppermost.

3.  Adjust edge stops to width of hinge.

Routing the Door

1.  Place hinge jig on hanging edge of door.

2.  Rotate the end plate at 90° to jig.

3.  Ensure end plate touches end of door.

4.  Ensure edge-stops touch opening face  

of door.

5.  Secure jig to door using the two    

bradawls.

6.  Adjust top blocks to position of hinges.

7.  Adjust bottom blocks to length of hinges.

8.  Adjust depth stop on router to thickness of 

hinge.

9.  Switch router on and locate guide bush into 

aperture.

10. Plunge down router and rout clockwise.

11. Repeat routing operation for each hinge 

recess.

12. Chisel corners square by hand to receive 

hinges or use corner chisel. Ref. C/CHISEL.

Routing the Frame

1.  Rotate the end plate until flush with jig.

2.  Butt the end plate into the head of frame.

3.  Ensure edge-stops touch edge of frame.

4.  Secure jig to door frame using the two 

bradawls.

5.  Locate guide bush into aperture and switch 

router on.

6.  Plunge down router and rout clockwise.

7.  Repeat routing operation for each hinge 

recess.

8.  Chisel corners square by hand to receive 

hinges or use a corner chisel Ref. C/CHISEL. 

-IB-

Содержание H/JIG/B




















Отзывы:

Нет отзывов