Trelawny VL203Ex, Руководство по эксплуатации и обслуживанию

Страница: 5 / 16

www.trelawny.co.uk
DECLARATION OF CONFORMITY
Appendix 1 - Hazardous Area Certification
The VL303Ex Chisel Scalers are certified compliant to the ATEX Directive (2014/34/EU) for safe use
within a hazardous area and has been assessed so by Element Materials Technology.
This product conforms to the Standards:
EN 60079-0:2018
EN ISO 80079-36:2016
EN ISO 80079-37
And is attributed with the product certification codes:
II 2 G Ex h IIC T4 Gb
II 2 D Ex h IIIC T135°C Db
With ATEX Certificate Number: EMT19ATEX0022X
Special Conditions of Safe Use
1. Air compressors used in conjunction with the Scaling Hammers shall incorporate means to prevent
the ingress of dust or other foreign material into the air supply i.e a filter on the compressor intake.
2. For air compressors used in conjunction with the Scaling Hammers, only lubricants that are resistant
to carbonisation shall be used.
3. The external painted surfaces of the equipment are not to be exposed to charging mechanisms
stronger than manual rubbing.
4. Air supply hoses used in conjunction with the equipment must be manufactured from anti-static
material with a surface resistance no greater than 10°Ω.
5. Equipment is to be lubricated before as detailed in the Operations & Maintenance Manual.
6. Any lubricating oil used must have an auto ignition temperature of > 185°c.
7. The equipment must not be stored in an explosive acetylene atmosphere (to prevent the formation of
acetylides on the copper heads).
Equipment must only be installed & maintained by suitably qualified and competent personnel in
accordance with the instructions provided and the terms of the applicable product services.