Trelawny SF11, Эксплуатация и обслуживание

Страница: 5 / 5

SERVICING continued
Trelawny SPT Ltd
Trelawny House, 13 Highdown Road, Sydenham Industrial Estate, Leamington Spa, Warwickshire,
CV31 1XT, United Kingdom
Telephone: +44 (0)1926 883781, Fax: +44 (0)1926 450352, Email: sales@trelawny.co.uk
Website: www.trelawnyspt.com
© TSPT UK 2009 Part No: 735.0110 issue 4
SURFACE PREPARATION TECHNOLOGY
Technical Specifications
Item No Part No Description Item No Part No Description
2 826.5004 Adaptor 3/4" BSP 20-24 491.1000 Wheel Assembly (set of 2)
3-5 491.2100 U Bolt Assembly (set of 2) 25 615.5341 Screwed Cap
6 828.1000 Ball Valve 26 712.5301 Compression spring
7 719.0750 Armoured Hose Assembly with Couplings 27 615.5361 Spring Cap
8-12 491.3000 Lifting Bracket Assembly 28 613.5301 Cylinder
11 490.2100 Locking Pin (set of 2) 29 614.5301 Brush Seal
13 490.0100 Handle Grip (set of 2) 30 612.5301 Piston (Taper fit)
14 422.0110 Handle including grips 31 426.5351 Cruciform cutter head – (Taper fit)
15-17 491.2000 Handle Mounting Assembly or 606.5303 Beryllium cutter head – (Taper fit) –spark resistant
18 490.1000 Rubber Handle Mounting
19-21 491.0100 Rubber Cylinder Block Mtg Assembly (set of 2)
22 440.0130 Sub Frame NOT SHOWN
437.0100 Vacuum Shroud assembly
731.0120 Polyurethane seal
Parts list
Risk of Hand Arm Injury
Because of various factors, the range of vibration emission during intended use of this tool is expected to be between 5.8m/s
2
– 8.1m/s
2
for this Scaler.
The vibration is dependent on the task, the operators grip, and the feed force employed etc.
Noise level measured in accordance with:
EN ISO 15744: 1999
Vibration measured in accordance with:
EN ISO 28927 and EN ISO 20643
(K) Equals the factor of uncertainty, which allows for variations in measurement and production.
Vibration data figures are tri-axial, which gives total vibration emission.
*In general all vibration values are considered to be –0% +40% (k = factor of uncertainty)
Trelawny SPT Ltd operates a policy of continuous product development and refinement and therefore reserves the right to change technical specifications
and product designs without giving prior notice.
Description Metric Imperial
Piston diameter 27mm 1.06”
Piston length 89mm 3.50”
Stroke 26.5mm 1.04”
Blows per minute 2300 x 11
Air pressure - (3/4”BSP Air Inlet) 6.2 bar 90psi
Air consumption 33 lps 70cfm
Length (handle lowered) 1300mm 51.2”
Height (Handle raised) 1230mm 48.4”
Work head dimensions 285mm (11.2”)L x 150mm (5.9”)W x 180mm (7.1”)D
Weight 37.2kg 82lbs
Noise level db(A) LpA 103.1
LwA
Vibration (AEQ) at the Handle Bar*
a=5.8 m/s
2
(K= +40% -0%)
113.1
Cutting width to edge 15mm 0.59”
Cutting width 252mm 9.9”