TrekStor DataStation PocketAir, Руководство пользователя

Страница: 11 / 34

A) USB-A female for using the Power-Bank function
B) Battery status LED
C) HDD status LED
D) Wi-Fi status LED
E) Internet connection status LED
F) On/Off switch / Network function
G) Micro-USB-B 3.0 female
H) Reset
I) RJ-45 LAN port
7 Starting up for the first time
You must charge the DataStation before initial use and when the battery is running
low.
7.1 Charging your DataStation
Once you have connected your DataStation via the included micro USB cable to a
computer or to a socket using a suitable power supply (e. g. TrekStor USB-Charger
e.fs), it is automatically charged. After 3 hours with USB power adapter (5 hours over
PC), the battery will be fully charged and the charging will stop automatically to
prevent overcharging.
i
Note:
During charging, the battery status LED (E) lights up green. Once charging is
completed, the status LED turns off. When recharging during ON state, the battery status
LED (E) is flashing in 4 second intervals to indicate the achievement of capacity.
i
Note:
A solid red battery status LED indicates a low battery. The lights change to
flashing if battery level drops below a critical value. Charge the DataStation
immediately!
i
Note:
The maximum battery runtime is reached after about 10 battery charging
cycles.
11