TrekStor DataStation PocketAir, Руководство пользователя

Страница: 16 / 34

12.3 Settings
The default settings can be changed here. Please note that incorrect entries may
lead to malfunction of DataStation. In this case you have to load default settings
(Chapter 12.3.5.4).
12.3.1 User
Click the “U
SER
” thumbnail. This window will allow you to modify the admin
password. The password should be at minimum 5 characters to maximum 32
characters in length. Click on
“S
AVE
” button to confirm the password.
The default User Name is "admin" and the password field is left blank.
12.3.2 Disk
Click the thumbnail "D
ISK
" . In the submenu of "D
ISK
1" you will find information about
the internal hard drive. The detailed information includes firmware version, serial
number and total capacity of the disk. With a click on “V
OLUME
” your partitions are
displayed.
12.3.3 Network
Network setting includes the host name and the settings for Wi-Fi and LAN, DHCP
server and Internet.
12.3.3.1 Host Name
The Host name is a name that is assigned to a device connected to a computer
network. It must begin with a letter and followed by a combination of letters and
numbers. Its length has to be between 2 and 8 characters.
12.3.3.2 Wi-Fi and LAN
The settings for Wi-Fi and LAN can be customized:
SSID:
Enter only a combination of letters and numbers. The SSID is composed of a
maximum of 32 characters.
Region:
Select your country.
Mode:
The default setting is 802.11b/g/n. You can also manually set the modes to 11
Mbps (802.11b), 54 Mbps (802.11g), and 150 Mbps (802.11n).
16