Trek DOMANE SLR 2017, Руководство по обслуживанию

Страница: 19 / 28

5 INSTALLING THE SHIFT CABLES
Securing the rear derailleur
1.
Thread the cables through the liners in the down
tube until they exit the bottom bracket cable port
at the bottom of the bike.
TIP
Tape the cables
to the frame
to avoid mixing
up the front
and rear.
2.
Install the cable guide by aligning the short end
with the rear derailleur cable. Make sure that the
plastic tails of the guide line up with the grooves
of the frame.
3.
Install a housing end cap, and then thread the shift
cable through the housing.
4.
Snap the frame housing stop into the frame.
Ensure that the dropout cable sleeve is inserted
in the frame.
5.
Clean the ends of the cable housing. Create a
bend in the housing that allows the cable to slide
without binding. See the illustration for guidance.
15