2023 FX+ / Dual Sport+
6
Bottom bracket/torque sensor
AUTHORISED DEALERS ONLY
:
Only authorised dealers should perform service on the e-system. Improper handling, tools used
or torque applied to these parts may result in damage to the e-system components and cables.
Remove the bottom bracket
Remove the chain guard, cranks and pedals before
following these instructions.
1. Remove the bottom bracket cover (9).
T10
2. Disconnect the torque sensor cable.
NOTICE:
Do not pull the cables apart by the wires –
this can damage them.
NOTICE:
If you do not disconnect the plug, you
will damage the torque-sensor cable when you try
removing the bottom bracket cup.
3. Remove the non-driveside cup.
4. Pull out the torque sensor/bottom bracket.
5. Remove the driveside bottom bracket cup, if
necessary.
Install the bottom bracket
1. Install the driveside cup. Torque to 35 Nm.
2. Insert the torque sensor and cable – notched side
first – into the non-driveside.
3. Install the non-driveside cup. Torque to 35Nm.
4. Reconnect the bottom bracket/torque sensor cable.
5. Fit all cables into the bottom bracket shell and install
the cover (9).
NOTICE:
Do not pinch the cables.
