Tregaskiss TOUGH GUN TT3 Reamer, Руководство пользователя

Страница: 3 / 42

TABLE OF CONTENTS
SECTION 1 — SAFETY PRECAUTIONS — READ BEFORE USING 1
1-1 Symbol Usage 1
1-2 Arc Welding Hazards 1
1-3 Additional Symbols For Installation, Operation, And Maintenance 4
1-4 California Proposition 65 Warnings 6
1-5 EMF Information 6
1-6 Principal Safety Standards 6
1-7 Commercial Warranty 7
SECTION 2 — SPECIFICATIONS 8
2-1 System Components 8
SECTION 3 — INSTALLATION 9
3-1 Installing the Reamer 9
3-2 Installing the Wire Cutter 10
3-3 Installing Nozzle Detect 12
SECTION 4 — SETUP 13
4-1 Air Motor Lubricator 13
4-2 Accessing Electrical and Pneumatic Controls 13
4-3 Wiring Interface Connections 14
4-4 Inversing Circuit Board Logic 15
4-5 Setting Up V-Block 16
4-6 Setting Up Nozzle Heights for Cutter Blade Insertion 17
4-7 Setting Up Nozzle Detect 18
SECTION 5 — OPERATION 20
5-1 Understanding L.E.D. Indicators 20
5-2 Programming Events Sequence 21
5-3 Manual Operation 22
5-4 Adjusting Flow Control Valves 22
SECTION 6 — MAINTENANCE 23
6-1 Replacing the Spindle Limit Switch 23
6-2 Replacing the Clamp Limit Switch 24
6-3 Replacing the Air Motor 25
6-4 Replacing the Circuit Board 25
6-5 Replacing the Cutter Blade 26
6-6 Replacing the Drive Belt 26
OM-TT3-1.4 iii