treesse minipool Quarz, Руководство по эксплуатации и техническому обслуживанию

Страница: 67 / 100

67
EN
U
minipool
Q
uarz
Use
ADJUSTING THE TEMPERATURE
Warm Jets(1)
menu/
select
Cool Light
When using a panel with WARM and COOL buttons (Temperature buttons), pressing WARM or COOL will cause the
temperature to flash.
Pressing a temperature button again will adjust the set temperature in the direction indicated on the button. When
the LCD stops flashing, the spa will heat to the new set temperature when required.
If the panel has a single temperature button, pressing the button will cause the temperature to flash. Pressing the
button again will cause the temperature to change in one direction (e.g. -). After allowing the display to stop flashing,
pressing the Temperature Button will cause the temperature to flash and the next press will change the temperature
in the opposite direction (e.g. -).
If a Temperature button is pressed and held when the temperature is flashing, the temperature will continue to change
until the button is released. If only one temperature button is available and the limit of the Temperature Range is
reached when the button is being held, the progression will reverse direction.