treesse FUSION SPA, Руководство по эксплуатации и техническому обслуживанию

Страница: 17 / 40

17
Fusion Spa
minipool
EN
U
Use
OPERATIONAL FUNCTIONS
WATER
TEMPERATURE
SETTING
When turned on, the last temperature set by the user is
recalled, which can be seen by pressing the key “
+
” or “
-
”.
To change it, press the “
+
” or “
-
” keys: this will increase/
decrease the displayed temperature by
+/- 0.5°C
.
After three seconds of inactivity, the display will return to
standby and the new temperature will be entered.
WHIRLPOOL
The
whirlpool
is started by:
press the key
whirlpool in progress is indicated by the
LED
press the key
whirlpool in progress is indicated by the
fixed blue key
The function can only be activated when the water is at
operational level.
When EMPTYING, the whirlpool is deactivated.
If not interrupted from the keypad, the function will be
deactivated automatically after 20 minutes.
CHROMATHERAPY
* Colour sequence: White, Red,
Orange, Yellow 1, Yellow 2, Yellow
3, Green 1, Green 2, Green 3, Blue
1, Blue 2, Blue 3, Blue 1, Blue 2,
Blue 3, Purple.... White, Red, etc.
Chromatherapy
is started by:
pressing the “Light” key
pressing the “Light” key
Activates a sequence of 16 colours that vary in an automatic
sequence.*
During the sequence, pressing the "Light" key again stops on
the current colour (e.g., Red): the sequence is interrupted and
remains fixed on the chosen colour.
If you want to change this colour, by repeatedly pressing the
"Light" key you can run through all the colours to choose a
different one.
Once you have selected a fixed colour, to return to the automatic
sequence you must turn off and reactivate the function.
Hold the "Light" key for two seconds to turn off the function.
If not switched off manually, the function stops automatically
after three hours.
The function can always be activated, even if the water level
is low.