Temperature control device (back view):
1. Fuse socket (1A) for power.
2. Fuse tube of the main return circuit, 32A x2. if the fuse tube is blown, the red indicator on the
socket will light up.
3. Connecting terminal: Connected to the temperature sensor (type k thermocouple).
4. Connecting terminal: Connected to the power cord and the heating wires.
Back of the furnace:
Temperature control guide:
1.
First install the ventilation pipe. Remove the net board on the back of the furnace, insert the
pipe into the hole, tighten the screw in the bottom of the pipe, finally, put on the cap of the
pipe.
