Functions:
1. Program button: Choose program 1- Program 5, the corresponding program number will be
shown on the No. indicator.
Program 1: 200
℃
for 15 minutes, 400
℃
for 15 minutes, 600
℃
for 15 minutes, 900
℃
for 15
minutes
Program 2: 200
℃
for 15 minutes, 400
℃
for 15 minutes, 600
℃
for 15 minutes, 1000
℃
for 15
minutes
Program 3: 300
℃
for 30 minutes, this mode is for drying the furnace
before first use or after
not being used for a long time.
Program 4: 100
℃、
300
℃、
500
℃、
600
℃
, 15 minutes each temperature, this mode is for
removing wax only.
Program 5: 200
℃
, 400
℃
, 600
℃
and 900
℃
, 10 minutes for each temperature. This is the fast
drying mode.
Program 6: Users can set temperatures and heating time for the four Subsections. The settings
will be saved into the furnace, and it will not be erased after the power is off.
2. Subsection button: Press this button to display the temperature and heating time of the four
subsections in a program, the corresponding subsection indicator will be on.
3. Select button: While setting Program 6, this button is for choosing temperature and time.
While in the time delay mode, this button is for choosing hour or minute.
4. Set button: This button is for customizing the temperature. Press this button to change the
settings in Program 6.
5. On/Off button: Press this button to start or stop the furnace, the indicator will be on and off
accordingly.
6. Timing work: Press this button to run in the time delay mode, and the timer starts to count
down, when the timer becomes 0, the furnace starts automatically.
7. Working switch: after connecting the furnace to the power supply, press this button to start
the furnace, press it again to stop working.
8. Power indicator: This indicator is on after the furnace is connected to a power supply.
9. Indicator lights of the four heating subsections: the indicators will be on according the
heating subsections, all four indicators and the Finish indicator will be on after the programs
are finished.
10. Program indicator: It displays the program number chosen from 1-6.
11. Temperature indicator: While setting the temperatures, it displays the temperature which is
being set. While the furnace is working, it indicates the actual temperature. While the furnace
is in the time delay mode, it indicates the hour of the timer.
12. Time indicator: The first two digits indicate minutes, the last two digitals indicate seconds.
While setting the time, it will indicate minutes, the seconds is 0. While working or in the time
delay mode, it indicates the countdown time.
13. Working current: While the furnace is working, it indicates the current. Its unit is Ampere. It
should indicate 0 while the furnace stops heating.
