11
Rev 2, 1_19_2016
The Scale should only be connected to the mains voltage socket with the power adapter
supplied.
Check before connecting the power adapter to the mains socket, that the
operating voltage stated on the power adapter complies with the local mains voltage.
If the operating voltage is not the same as the mains voltage, the power adapter must
not be connected to the mains socket and contact customer service.
Placement of Scale
The location in which the scale is placed is very important in order for the scale to work
to its full potential. Certain conditions can affect the capabilities of the scale, conditions
like: the presence of air flow, variations in temperature, and direct sunlight. Please
follow the recommendations given below in choosing a location to place your scale.
Place the scale on a solid, firm and preferably vibration-proof, horizontal base
Make sure that the weighing machine cannot be shaken or knocked over
Protect from direct solar radiation
Avoid drafts and excessive temperature fluctuations
Avoid placing the scale near or on any magnetic surfaces.
Application Menu
Function settings
To enter the function setting mode, press the ON/OFF key to turn the power off. Then
press and hold the ZERO key and then press the ON/OFF key again. The display will
show A_ON or A_OFF
Auto backlight mode
Press the UNIT key, the display will show L_ON, L_OFF, or L_Au. Press the ZERO key
to select. L_ON means the auto backlight function is active. L_OFF means the auto
backlight function is inactive, and L_Au means the auto backlight function is on Auto
Key Functions
ON/OFF KEY is used to turn the Scale on or off.
ZERO KEY sets or re-adjusts the machine into the correct zero position.
Zero Range: 0-10% of full capacity
TARE KEY subtracts the gross weight on the platter (box or container, etc) to the
tare weight.
Tare Range: 10- 100% of full capacity. Multiple TARE allowed within
capacity.
