Rev 2, 12.02.2016
15
Display messages:
Low battery indicator
Tare indicator
Weighing units
Negative value indicator
Zero indicator
Stable indicator
Key Functions:
The On/Off key is to turn the Balance On or Off (Note: it has an On/Off hard
switch at the bottom).
The Zero key allows the user to subtract the container value multiple times within
the capacity weight, and is used to set or re-adjust the weighing scale in correct
zero position.
The Print key is to send data to external device through RS232 connector.
The Unit key is to toggle between different units of measurement.
The PCS key is for piece counting
Program options
Please see our web-site at http://lwmeasurements.com for practical demonstrations of
application usage.
Interface Settings
Press “On/Off” to turn on the scale, when instrument displays --------
Press “Print”, the display will show b xxx BAU value
Press “Unit” to select among (1200,2400,4800,9600), default setting is 9600
Press “Zero” to enter Parity mode, the display will show P xxx PAR
Press “Unit” to select odd, even or none ( odd stands for 7 data bits with odd
parity, even stands for 7 data bits with even parity, none stands for 8 data bit
without parity), default setting is none
Pr
ess the “Zero” key to enter print mode, the display will show n xxx mod
Press “Unit” to select CON, OFF, KEY, STB (Default setting is KEY)
o
OFF stands for serial data output disabled
o
KEY stands for manual mode by pressing “PRINT”
o
STB stands for automatic print when scale is stable
o
CON stands for continuous print
Press [Zero] again to return to weighing mode
