SETTING UP YOUR TREBLAB Z7 Pro
Turn ON
Press the
POWER
button for 3 sec. You will hear the sound
prompt and, a few seconds later, the “Bluetooth pairing on”
voice prompt. The LED on the right earcup will turn blue and
then will start flashing blue/red. In case the headphones have
been previously connected to the smart device, instead of
“Bluetooth pairing on”, you will hear the “Connected” voice
prompt and the LED will start flashing blue/green slowly.
Turn off
Press and hold the
POWER
button for 4 sec. You will hear the “Power
off” voice prompt. The blue LED will light up for a second and will go off.
Function
Enable Ambient
Sound mode
Enable ANC
Disable
Ambient Sound
and ANC modes
Awareness
mode
Operation
When
ANC
mode is on, press the
ANC
button
once.
When the
ANC
and
Ambient Sound
modes
are off, press the
ANC
button once.
When the
Ambient Sound
mode is on, press
the
ANC
button once.
When the headphones are turned on, close
the right earcup with a palm.