2
5
STEP
1
UMBRELLA ASSEMBLY
Two-persons recommended for team lift and to complete assembly.
With base cover in place or mount kit installed, lift umbrella up and insert the main frame
onto the installed rotating hub (Fig. 1). Secure umbrella into place by inserting the (2) bolts
and (2) washers and tighten using 6mm hexagon wrench provided (Fig. 2).
REMOVE ALL PLASTIC PACKAGING MATERIAL FROM ALL PARTS PRIOR TO
OPENING UMBRELLA. CHECK UNDER CANOPY FOR PACKAGING AROUND RIBS.
Your umbrella is now ready for use!
NOTE: REFER TO SEPARATE BASE OR MOUNT KIT MANUAL
FOR BASE ASSEMBLY PRIOR TO PROCEEDING.
(Fig. 1)
(Fig. 2)
Foot Pedal
Main Frame
Rotating Hub
360
(Fig. 10)
STEP
4
ROTATING UMBRELLA
Place your foot on the foot pedal of the rotating hub and
step-on
the pedal to release
rotating lock (Fig. 10). Place hands on the main frame and rotate the umbrella frame
in either direction, in 90° increments. To lock position, step off the foot pedal to engage
rotating lock.
(Fig. 11)
(Fig. 12)
STEP
5
LIGHT ADAPTER FEATURE
To ATTACH Umbrella Light: (sold separately)
Loosen the light adapter built into the umbrella runner by turning counter-clockwise
(Fig. 11). After loosening, pull down light adapter post (Fig. 12) to attach the umbrella light
(sold separately).
To REMOVE Light and CLOSE adapter:
Hold the umbrella light, depress the clamp release button to release the clamp lock.
Remove umbrella light and gently push up the light adapter post back into umbrella runner
and tighten turning clockwise (Fig. 11).
NOTE:
It may be necessary to lower umbrella to a reachable height to pull light adapter
down and attach umbrella light. It is not necessary to remove light to close umbrella.
IMPORTANT:
For free standing base applications, it is imperative to install the appropriate base for your
size cantilever. The minimum base weight recommended for the AG25T is 200 lbs.
