Thank you for purchasing Treasure Garden’s AG25T Cantilever.
Please remove all contents from the package, inspect and review checklist.
Some parts may be included in the styrofoam packaging.
Do not discard any packaging or box until assembly is complete.
CHECKLIST
6
1
A - (1) 360° Rotating Hub
I - (1) Crank Handle
B - (1) Foot Pedal
J - (1) Canopy Support Beam
C - (1) Hardware Assembly
K - (1) Finial
D - (1) Main Frame
L - (1) Canopy
E - (1) Adjustment Knob
M - (7) Spring Loaded Rib End Cap
F - (1) Open/Close Mechanism N - (1) Valance (optional)
G - (1) Tilt Mechanism
O - (1) Light Adapter (light sold separately)
H - (1) Tilt Degree Scale
P - (1) Protective Cover
IMPORTANT:
Prior to assembly it is important to decide on the location of the umbrella.
· Allow ample height to avoid damage to your umbrella during assembly and usage.
· Choose a location that is level and sturdy.
· Avoid any sloping of soft ground.
· Consider a location that will maximize the umbrella’s 360° rotating function. Placing the
umbrella between two entertaining areas is ideal.
CAUTION:
· Fully assembled, the umbrella weighs over 300 lbs. Moving umbrella fully assembled
will increase the risk of damage to your umbrella and/or can cause serious injury. We
recommend a two-person team for assembly and disassembly.
Clos
e
Op
en
Righ
t L
eft
Open
Max
0˚
Max
K
L
D
N
J
M
O
P
A
B
E
C
6mm Hexagon
Wrench
F
G
H
I
CARE AND MAINTENANCE
• When not in use, close and cover umbrella with provided protective cover.
• Allow a wet canopy to dry while in open position, but do not leave unattended.
• If necessary, clean the fabric with lukewarm water, mild detergent, and a sponge.
• Wipe sliding marks on the aluminum poles with a damp cloth.
Winter Storage:
• Store in a dry place.
After the Winter:
• Check the condition and function of the umbrella. Any defects must be repaired by a
professional.
Cl
Op
en
Righ
t L
eft
Open
Max
0˚
Max
(Fig. 13)
(Fig. 14)
(Fig. 15)
STEP
6
CLOSING UMBRELLA
Position yourself behind umbrella. Insert crank handle into “Open/Close” socket in crank
mechanism (Fig. 13). Turn crank handle counter clockwise until the canopy is closed
(Fig. 14). Turn adjustment knob counter clockwise and slide downward until umbrella is in
closed position. Tie string around canopy to secure canopy. Cover umbrella with provided
protective cover when not in use (Fig. 15).
NOTE:
Prior to closing ensure that the canopy
is in a level (non-tilt) position.
Properly store umbrella when not in use. Close umbrella, tie
string around canopy and cover umbrella with provided protective cover.
TO PROPERLY FOLD CANOPY:
The canopy will last longer if you fold it as it was packed and shipped. This technique is
similar to the way a parachute is folded and is especially important when folding the canopy
for seasonal storage or when left in the closed position for an extended period of time.
Using this technique at all times will significantly extend the life of the canopy.
• When the umbrella has been fully closed, stand in front of the canopy
structure and begin the folding process by pulling out two panels
opposite the main frame. Pull the two panels together and roll tight into
the canopy.
• Once rolled tight, pull adjacent panels out one at a time and fold to the
center, alternating sides until all the panels have been pulled out from
the arms and folded into the center.
• Tie string around canopy and cover umbrella with provided protective
cover.
