Treasure Cove TC1X, Руководство по эксплуатации

Страница: 13 / 24

10
circuits where rejecting targets is done starting at iron and moving upwards in a clockwise
manner (see the figure on page 6), NOTCH DISCRIMINATION allows you to select which
of the eight segments are accepted or rejected individually. For example, if you want to
reject pull tabs using DISCRIMINATION, you would need to also reject the iron, foil and
nickel segments. NOTCH DISCRIMINATION allows you to only reject the pull tab segment
while still accepting the other seven segments.
The TC1X comes with three predefined programs along with one that can be customized
to meet your specific needs. The Treasure Commander’s programs include:
 ALL METALS : This mode is designed to be used when you are looking for any type
of metal that might be present. Treasure hunters searching for old military or
settler artifacts made of iron often use this to ensure no relics are inadvertently
overlooked. It is also a good choice when trying to find where a site used to be and
no visible signs remain. Once metal objects are located indicating you are in the
right area, additional discrimination can be applied.

COIN
: This mode is designed for coin hunters that want to find coins and other
items while rejecting iron and tinfoil that are often found in the areas where coins
are recovered.

JEWELRY
: This mode is designed to eliminate some trash while ensuring gold and
silver jewelry including rings, pendants, chains, earrings and other items are
detected.
4
PINPOINT
: When you want to zero-in on a target that has been detected, switching
to the PINPOINT mode will enable you to quickly identify where to dig in order to recover
the target. Press and hold the "
PP
" touchpad while sweeping the coil across the area
containing the target. The target depth in inches will be shown on the LCD screen. To
return to the
DISCRIMINATE
search mode, simply release the "PP" touchpad.