Treasure Cove TC1X, Руководство по эксплуатации

Страница: 10 / 24

7

Depth
: When a target is detected and the Pinpoint mode is activated, the target’s
approximate depth will be displayed in inches on the right side of the LCD next to
the QUARTER segment.
NOTE
: This indication assumes the target is coin-sized so
a larger target will appear to be shallower that it really is and a smaller target will
appear deeper than it really is. Use this as a guide to avoid damaging targets when
recovering them but recognize that the accuracy depends on the size of the target.

Settings / Detect Modes and Discrimination / Notch Modes
: The lower area
of the LCD screen will indicate which mode you are in as well as when searching,
which of the four (3) discrimination programs are active.
 Signal Strength : Located just beneath the P-TAB / S-CAP segments, this icon will
provide indication of how strong the signal from a detected target is. Combined
with the Depth indication, the Signal Strength indication can help you determine
the relative size and depth of a target before you recover it.
Touchpad Operation
While the Treasure Commander TC1X offers a high level of performance under a wide
range of conditions, all of its functions are controlled through the use of just seven (7)
touchpads. The four (4) touchpads located around the ENTER touchpad serve dual
functions; i.e., they allow you to navigate through and adjust specific features when in the
SETTINGS mode and activate specific functions when used by themselves.

POWER
: This touchpad turns the TC1X ON and OFF

SETTINGS / DEL
: This touchpad provides the ability to adjust the various
functions of the TC1X and select the desired operating mode