Traxxas Villain 1506, Руководство пользователя

Страница: 23 / 24

23
Index
Antenna (receiver) 6, 12
Antenna (transmitter) 9, 12
sleeve 12
tip 12
tube 12
wire 12
Batteries 5, 10, 11
alkaline 11, 15
charging 11
compartment 6
connector 6
hold-down strap 6
installation 11
mAh 19
Ni-MH (nickel-metal hydride) 11
NiCad (nickel-cadmium) 5, 10, 11, 15
rechargeable 11
Battery Connectors 9
Battery Eliminator Circuit (BEC) 10
Boat Retrieval 19
Boat Stand 5
Bow 6
Cavitation 19
Channel 10, 14
Channel number 10
Charger 5
Clearing your frequency 10
Crystal 10, 14
Customer service 3
Decals 8
Driving 19
E-mail 3
Electronic Speed Control (XL-10 Marine) 6, 9, 10, 14
adjusting 16
programming 17-18
wiring 16
Flag color 10
Frequency band 10, 12
Gear Cover 6
Heat Exchanger 6
Maintenance 21
Motor 6
Mounting Post 6
Neutral position 10
On/Off switch 6, 9
Outdrive 6
connecting rod 6
Outdrive Shaft 20
end play 20
Painting 8
Power Switch 9
Propeller 6
Quick Start 7, 8, 11, 12, 14, 15, 19, 21
Radio interference 15
Radio System 9, 15
adjustments 13
box 6
controls 13
range-testing 15
rules 14
terminology 10
terms 10
Range 12, 14
Receiver 6, 9, 10
Required equipment 5
Run Time 19
increasing 19
Safety 4
Salt water 4
Servos 10
centering 21
reversing 9
steering 6, 9
Shipping 3
Steering Trim 9, 10
Steering Wheel 9
Supplies 5
Support 3
Thermal Shutdown Protection 10
Throttle Neutral Adjustment 9
Throttle Trigger 9
Throttle Trim 9, 10, 14
Tools 5
Transmitter 10, 14
power indicator 9
Trim Adjustment 6
bracket 6
Trim Angle 20
Twist-Lock 6, 12
Villain Wiring Diagram 9
Water Cooling 6
Water Pickup 6
X-tal see also Crystal 10
6. Replace the XL-10 Marine speed controller and the two
540 motors with the Traxxas EVX Marine speed controller
(part #3015) and two Titan 550 marine motors (part#
1585).
Installing the Traxxas EVX speed controller and two
Titan 550 marine motors into the Villain will double the
voltage (14.4v) to the motors, significantly increasing power.
It’s very important to use the Titan 550 marine motors with
the EVX speed control. The stock 540 motors will overheat
when powered by 14.4 volts. It is recommended to use the
Villain water-cooing kit when using the EVX speed controller
with two Titan marine motors for extra cooling.
7. Install the Villain water-
cooling kit (part #1580).
The water-cooling kit will
provide significant cooling
to both of the motors.
Extreme heat (as
explained above) can
deteriorate the motors’ performance more rapidly, and
possibly cause failure if the components are allowed to get
too hot. The water-cooling kit is highly recommended when
replacing the two stock 540 motors and XL-10 Marine speed
controller with two Titan 550 motors and the EVX speed
controller or modified motors. It is still very important to
allow the motors to cool down between runs for 15 minutes,
even with the Villain water-cooing kit.