background image

SUMMIT 

• 

5

Important Warnings for users of Lithium Polymer (LiPo) batteries:

Lithium Polymer (LiPo) batteries are signiicantly more volatile than 
other rechargeable batteries. 

ONLY use a Lithium Polymer (LiPo) balance charger with a balance 
adapter (such as the Traxxas EZ-Peak Plus Charger #2933 or the 2-Cell /3-
Cell LiPo Balance Charger #2935) to charge LiPo batteries. Never use NiMH 
or NiCad type chargers or charge modes to charge LiPo batteries. The use 
of a NiMH or NiCad charger or charge mode will damage the batteries and 
may cause ire and personal injury.

Never charge LiPo battery packs in series or parallel with this charger. 
Charging packs in series or parallel may result in improper charger cell 
recognition and an improper charging rate that may lead to overcharging, 
cell imbalance, cell damage, and ire. 

• ALWAYS inspect your LiPo batteries carefully before charging. Look for 

any loose leads or connectors, damaged wire insulation, damaged cell 
packaging, impact damage, luid leaks, swelling (a sign of internal damage), 
cell deformity, missing labels, or any other damage or irregularity. If any of 
the above conditions are observed, do not charge or use the battery pack. 

• Do not store or charge LiPo batteries with or around other batteries or 

battery packs of any type, including other LiPos.

• Store and transport your LiPo batteries in a cool, dry place. Do not store in 

direct sunlight. Do not allow the storage temperature to exceed 140°F or 
60°C or the cells may be damaged and risk of ire created.

• DO NOT disassemble LiPo batteries or cells.

• DO NOT attempt to build your own LiPo battery pack from loose cells.

• ALWAYS proceed with caution and use good common sense at all times.

Charging and Handling Precautions/Warnings

• ALWAYS proceed with caution and use good common sense at all times.

• Children require adult supervision while using this charger.

• DO NOT let any exposed battery contacts or wires touch each other. This 

will cause the battery to short circuit and create the risk of ire.

• While charging, ALWAYS place the battery (all types of batteries) in a ire 

retardant/ire proof container and on a non-lammable surface such as 
concrete.

• NEVER charge batteries on wood, cloth, carpet, or on any other lammable 

material

• ALWAYS charge batteries in a well-ventilated area.

• REMOVE lammable items and combustible materials from the charging 

area.

• DO NOT operate the charger in a cluttered space, or place objects on top of 

the charger or battery.

• If any battery or battery cell is damaged in any way, DO NOT charge, 

discharge, or use the battery. 

• Keep a Class D ire extinguisher nearby in case of ire.

• BEFORE you charge, ALWAYS conirm that the charger settings exactly 

match the type (chemistry), speciication, and coniguration of the battery 
to be charged.

• DO NOT use the 2-3 cell LiPo charger #2935 to charge NiMH batteries.

• DO NOT exceed the battery manufacturer’s maximum recommended 

charge rate.

• DO NOT disassemble, crush, short circuit, or expose the batteries or cells to 

lame or any other source of ignition.

• If a battery gets hot to the touch (temperature greater than 110°F/43°C) 

during the charging process, immediately disconnect the battery from the 
charger and discontinue charging.

• DO NOT leave the charger and battery unattended while charging, 

discharging, or anytime the charger is ON with a battery connected. If there 
are any signs of a malfunction, unplug the power source and/or stop the 
charging process immediately.

• ALWAYS unplug the charger from the wall outlet and disconnect the 

battery when not in use.

• DO NOT operate the charger inside of an automobile.

• AVOID short-circuits by always connecting the charge cable to the charger 

irst and then to the battery to charge or discharge. Remember to always 
reverse this procedure when disconnecting the battery.

• NEVER connect more than one battery at a time to the charger.

• DO NOT disassemble the charger.

• REMOVE the battery from your model or device before charging.

• DO NOT expose the charger to water or moisture.

• ALWAYS store battery packs safely out of the reach of children and pets.

• DO NOT charge batteries if you observe ANY of the following conditions:

- Batteries that are fully charged or have been only slightly discharged.

- Batteries that are hot (temperature greater than 110°F / 43°C)

- Batteries that are not expressly stated by the manufacturer to be suitable 

to accept the power output (voltage and amperage) the charger delivers 
during the charging process.

- Batteries that are damaged or defective in any way. Examples of damage 

or defects include, but are not limited to: batteries with dented cells, 
damaged or frayed wires, loose connections, luid leaks, corrosion, 
plugged vents, swelling, cell deformity, impact damage, missing labels, 
melted components, or any other signs of damage.

- Battery packs that have been altered from original manufacturer 

coniguration.

- Non-rechargeable batteries (explosion hazard)

- Batteries that have an internal charge circuit or a protection circuit.

SAFETY PRECAUTIONS

Содержание Summit 1:10 TRA5607L





































Отзывы: