SUMMIT
•
13
TRAXXAS TQ
i
RADIO SYSTEM
The battery compartments can be reconigured to accept many sizes
of LiPo batteries. If you are using batteries that are very thick, the
spring clip may need to be removed from the battery compartment.
Spring Clip Removal
1. Pull down on the inside of
the clip.
2. Push the clip in toward
the center of the model
to release.
Spring Clip Installation
1. Insert the two tabs on
the spring clip into the
rectangular tab slots in
the chassis.
2. Rotate the spring
clip upward.
3. Snap the tabs into place.
Many LiPo batteries do not use a hard plastic case. If using LiPo
batteries that do not have a hard case, always be sure to use the foam
rubber cushion in the front of the battery compartment.
Do not use
the battery retainer tabs in the front of the battery compartments
when using LiPo batteries that are not in a hard plastic case.
A hard
front impact or crash when driving can damage the LiPo batteries.
THE TRAXXAS HIGH-CURRENT CONNECTOR
Your model is equipped with the Traxxas
High-Current Connector. Standard connectors
restrict current low and are not capable of
delivering the power needed to maximize the
output of the EVX-2. The Traxxas connector’s
gold-plated terminals, with large contact surfaces, ensure positive
current low with the least amount of resistance. Secure, long-lasting,
and easy to grip, the Traxxas connector is engineered to extract all
the power your battery has to give.
The following Traxxas High-
Current Connector packages
are available from your
hobby dealer. When using
adapters, be careful not to
exceed the current rating of
the Molex connector.
Part #3060
Single Male/Female
Part #3080
2-Pack Female
Part #3070
2-Pack Male
Part #3061
Male Charge Adapter
Part #3062
Female Charge Adapter
