background image

 GRAVE DIGGER

INTRODUCTION

Your model includes the latest Traxxas TQi 2.4GHz transmitter 
with Traxxas Link

 Model Memory. The transmitter’s easy-to-

use design provides instant driving fun for new R/C enthusiasts, 
and also offers a full compliment of pro-level tuning features 
for advanced users – or anyone interested in experimenting 
with the performance of their model. The steering and throttle 
channels feature adjustable Exponential, End Points, and Sub-
Trims. Steering and braking Dual Rate are also available. Many of 
the next-level features are controlled by the Multi-Function knob, 
which can be programmed to control a variety functions. The 
detailed instructions (page 23) and Menu Tree (page 25) included 
in this manual will help you understand and operate the advanced 
functions of the new TQi radio system. For additional information 
and how-to videos, visit Traxxas.com.

RADIO AND POWER SYSTEM TERMINOLOGY

Please take a moment to familiarize yourself with these radio and 
power system terms. They will be used throughout this manual. A 
detailed explanation of the advanced terminology and features of 
your new radio system begins on page 23.

2.4GHz Spread Spectrum 

– This model is equipped with the 

latest R/C technology. Unlike AM and FM systems that require 
frequency crystals and are prone to frequency conflicts, the TQi 
system automatically selects and locks onto an open frequency, 
and offers superior resistance to interference and “glitching.” 

BEC (Battery Eliminator Circuit)

 - The BEC can either be in the 

receiver or in the ESC. This circuit allows the receiver and servos 
to be powered by the main battery pack in an electric model. 
This eliminates the need to carry a separate pack of 4 AA 
batteries to power the radio equipment.

Brushless Motor

 - A D/C brushless motor replaces the brushed 

motor’s traditional commutator and brush arrangement with 
intelligent electronics that energize the electromagnetic 
windings in sequence to provide rotation. Opposite of a brushed 
motor, the brushless motor has its windings (coils) on the 
perimeter of the motor can and the magnets are mounted to the 
spinning rotor shaft.

ESC (Electronic Speed Control)

 - An electronic speed control 

is the electronic motor control inside the model.  The XL-5 
uses MOSFET power transistors to provide precise, digital 
proportional throttle control. Electronic speed controls use 
power more eficiently than mechanical speed controls so that 
the batteries run longer. An electronic speed control also has 
circuitry that prevents loss of steering and throttle control as the 
batteries lose their charge.

Frequency band

 - The radio frequency used by the transmitter to 

send signals to your model. This model operates on the 2.4GHz 
direct-sequence spread spectrum.

LiPo

 - Abbreviation for Lithium Polymer. Rechargeable LiPo 

battery packs are known for their special chemistry that allows 
extremely high energy density and current handling in a 
compact size. These are high performance batteries that require 
special care and handling. For advanced users only.

mAh

 – Abbreviation for milliamp hour. A measure of the capacity 

of the battery pack. The higher the number, the longer the 
battery will last between recharges.

Neutral position

 - The standing position that the servos seek 

when the transmitter controls are at the neutral setting.

NiCad

 - Abbreviation for nickel-cadmium. The original 

rechargeable hobby pack, NiCad batteries have very high 
current handling, high capacity, and can last up to 1000 
charging cycles. Good charging procedures are required to 
reduce the possibility of developing a “memory” effect and 
shortened run times.

NiMH

 - Abbreviation for nickel-metal hydride.  Rechargeable 

NiMH batteries offer high current handling, and much greater 
resistance to the “memory” effect. NiMH batteries generally 
allow higher capacity than NiCad batteries. They can last up to 
500 charge cycles. A peak charger designed for NiMH batteries is 
required for optimal performance.

Receiver

 - The radio unit inside your model that receives signals 

from the transmitter and relays them to the servos.

TRAXXAS TQ

i

 RADIO

Содержание Grave digger 3603x































Отзывы: