background image

24 

 GRAVE DIGGER

TQ

i

 ADVANCED TUNING GUIDE

Model Lock

The Traxxas Link Model Memory feature can store up to twenty models 
(receivers) in its memory. If you bind a twenty-irst receiver, Traxxas Link 
Model Memory will delete the “oldest” receiver from its memory (in 
other words, the model you used the longest time ago will be deleted). 
Activating Model Lock will lock the receiver in memory so it cannot be 
deleted.

You may also bind multiple TQi transmitters to the same model making 
it possible to pick up any transmitter and any previously bound model 
in your collection and simply turn them on and drive. With Traxxas Link 
Model Memory, there is no need remember which transmitter goes 
with which model and there is never a need to have to select any model 
from a list of model memory entries. The transmitter and receiver do it 
all for you automatically.

To activate Model Lock:

1.  Switch on the transmitter and receiver you wish to lock. 
2.  Press and hold MENU. Release when the status LED blinks green.
3.  Press MENU three times. The status LED will blink green four  

times repeatedly.

4.  Press SET. The status LED will blink green in single-lash intervals. 
5.  Press SET once. The status LED will blink red once repeatedly. 
6.  Press MENU once, the LED will blink red twice repeatedly. 
7.  Press SET, the LED will blink rapidly green. The memory is now 

locked. Press and hold MENU to return to driving mode. 

 

Note

: To unlock a memory, press SET twice at step 5. The LED will 

blink rapidly green to indicate the model is unlocked. To unlock all 
models, press MENU twice at step 6 and then press SET.

To delete a model:

At some point, you may wish to delete a model you no-longer drive  
from the memory.
1.  Switch on the transmitter and receiver you wish to delete. 
2.  Press and hold MENU. Release when the status LED blinks green.
3.  Press MENU three times. The status LED will blink green four  

times repeatedly.

4.  Press SET once. The status LED will blink green once repeatedly. 
5.  Press MENU once. The status LED will blink  green twice repeatedly. 
6.  Press SET. The memory is now selected to be deleted. Press SET to 

delete the model. Press and hold MENU to return to driving mode.

Failsafe

Your Traxxas radio system is 
equipped with a built-in failsafe 
function that returns the throttle 
to its last saved neutral position in 
the event of a signal loss. The LED 
on the transmitter and the receiver 
will rapidly lash red.

LED Color / Pattern

Name

Notes

Solid green

Normal Driving Mode

See page 12 for information on how to use your transmitter controls.

Slow red (0.5 sec on / 0.5 sec off)

Binding

See page 14 for more information on binding.

Flashing fast green (0.1 sec on / 0.15 sec off)

Throttle Trim Seek Mode

Turn the Multi Function knob right or left until the LED stops lashing.  
See page 23 for more information.

Flashing medium red (0.25 sec on / 0.25 sec off)

Low Battery Alarm

Put new batteries in the transmitter. See page 11 for more information.

Flashing fast red (0.125 sec on / 0.125 sec off)

Link Failure / Error

Transmitter and receiver are no longer bound. Turn the system off and then 
back on to resume normal operation. Find source of the link failure (ie out of 
range, low batteries, damaged antenna).

Programming Patterns

Counts out number (green or red) then pauses

Current menu position

See Menu Tree for more information.

Fast green 8 times

Menu setting accepted (on SET)

Fast red 8 times

Menu SET invalid

User error such as trying to delete a locked model.

LED Color / Pattern

Name

Notes

Solid green

Normal Driving Mode

See page 12 for information on how to use your transmitter controls.

Slow red (0.5 sec on / 0.5 sec off)

Binding

See page 14 for more information on binding.

Flashing fast red (0.125 sec on / 0.125 sec off)

Fail-Safe / Low Voltage Detect

Consistent Low Voltage in the receiver triggers Fail-Safe so there is enough 
power to center the throttle servo before it completely loses power.

x

8

x

8

or

TRANSMITTER LED CODES

RECEIVER LED CODES

Содержание Grave digger 3603x































Отзывы: