background image

2 • E-REVO VXL BRUSHLESS

3

 

BEFORE YOU 
PROCEED

3

 SAFETY 

PRECAUTIONS

5

 

TOOLS, SUPPLIES 
AND REQUIRED 
EQUIPMENT

6

 

ANATOMY OF 
THE E-REVO VXL 
BRUSHLESS

7

 

QUICK START: 
GETTING UP  
TO SPEED

8

 TRAXXAS 

TQ

RADIO SYSTEM

16

  ADJUSTING THE 

ELECTRONIC SPEED 
CONTROL

16

  DRIVING YOUR MODEL

20

  BASIC TUNING 

ADJUSTMENTS

26

 MAINTAINING 

 

YOUR MODEL

27 

ADVANCED TUNING 
ADJUSTMENTS

31 

TQ

i

 ADVANCED 

TUNING GUIDE

INTRODUCTION

Thank you for purchasing the Traxxas E-Revo VXL Brushless electric 
monster truck. The E-Revo is the most advanced electric monster 
truck ever created. We built the E-Revo for 6-cell LiPo and brushless 
power right from the start. E-Revo’s driveline has been engineered to 
endure the horsepower and punishment that’s possible with today’s 
motor and battery technology.  E-Revo VXL Brushless is Ready-To-
Race right out of the box, and is ready for your choice of Power Cell 
LiPos.

This manual contains the instructions you will need to operate and 
maintain your model so that you can enjoy it for years to come. 
We want you to feel confident that you own one of the best-
performing models in the market and that it is backed by a team 
of professionals who aim to provide the highest level of factory 
support possible. Traxxas models are about experiencing total 
performance and satisfaction, not just with your model, but also 
with the company that stands behind it. 

We know you’re excited about getting your new model on the 
road, but it’s very important that you take time to read through the 
Owners Manual. This manual contains all the necessary set-up and 
operating procedures that allow you to unlock the performance 
and potential that Traxxas engineers designed into your model. 

Even if you are an experienced RC enthusiast, it’s important to 
read and follow the procedures in this manual.

Thank you again for going with Traxxas. We work hard every day  
to assure you the highest level of customer satisfaction possible.  
We truly want you to enjoy your new model!

Traxxas Support

Traxxas support is with you every step of the 
way. Refer to the next page to find out how to 
contact us and what your support options are.

Quick Start

This manual is designed with a Quick 
Start path that outlines the necessary 
procedures to get your model up 
and running in the shortest time possible. If you are an 
experienced RC enthusiast you will find it helpful and fast. 
Be sure and read through the rest of the manual to learn 
about important safety, maintenance, and adjustment 
procedures. Turn to page 8 to begin.  

REGISTERING YOUR MODEL

In order to serve you better as our customer, please  
register your product within 10 days of your purchase  
online at Traxxas.com/register.

T r a x x a s . c o m / r e g i s t e r

FCC Compliance

This device contains a module that complies with the limits for a Class B digital device as described in part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 

The limits for a Class B digital device are designed to provide reasonable protection against harmful interference in residential settings. This product generates, uses, and can radiate radio 
frequency energy, and, if  not operated in accordance with the instructions, may cause harmful interference to radio communications. The user is cautioned that changes or modifications not 
expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Canada, Industry Canada (IC)

This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following 
two conditions: This device may not cause interference, and this device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency (RF) Exposure Statement

This equipment complies with radio frequency exposure limits set forth by FCC and Industry Canada for an uncontrolled environment. This equipment should be installed and operated with 
a minimum distance of 20 centimeters between the radiator and your body or bystanders and must not be co-located or operating in conjunction with any other antenna or transmitter.

Содержание 86086-4









































Отзывы: