www.traxontechnologies.com
©2015 tRAxOn teCHnOLOGies - An OsRAM Business. ALL RiGHts ReseRved. tRAxOn™, tx COnneCt®, ARe tRAdeMARks Of tRAxOn teCHnOLOGies. u.s. pAtents, e.u.
pAtents, jApAn pAtents, OtHeR pAtents pendinG. speCifiCAtiOns ARe suBjeCt tO CHAnGe witHOut nOtiCe.
installation Guide
06/15 v0.1
7 of 15
Fixture Preparation and Checking
2.2.2
Carefully open the package box. inspect and check the content against the packing
1.
contents provided in installation Guide. Check the content for any visual damage or
defect. Check the voltage rating of the fixtures.
Report any defect found to your nearest traxon office or authorized agent. dO nOt
2.
attempt to install any fixture with defects.
Cable Bending
2.2.3
Cable must nOt be bent below the Minimum Bending Radius as specified by cable
manufacturer:
1 foot version only allow a maximum bending angle of 30 degree.
•
Maximum Bending Angle
fiG.5:
30˚
4 feet version cables have a minimum bending radius of 30mm.
•
Maximum Bending Radius
fiG.6:
30mm
