www.traxontechnologies.com
©2015 tRAxOn teCHnOLOGies - An OsRAM Business. ALL RiGHts ReseRved. tRAxOn™, tx COnneCt®, ARe tRAdeMARks Of tRAxOn teCHnOLOGies. u.s. pAtents, e.u.
pAtents, jApAn pAtents, OtHeR pAtents pendinG. speCifiCAtiOns ARe suBjeCt tO CHAnGe witHOut nOtiCe.
installation Guide
06/15 v0.1
6 of 15
INSTALLATION
2.
Points To Consider
2.1
plan your installation before mounting any fixtures. the following should be considered for a
successful installation:
installation distances and appropriate cable lengths. for calculating the number of fixtures
•
of your specific application, please consult your local traxon office or authorized agent for
necessary aid.
the number of data injectors and fixtures.
•
distance between each fixtures.
•
Pre-Installation Checks
2.2
System Checking
2.2.1
determine the installation location of data injectors and fixtures. distance between data
1.
injector and first fixture should not be more than the limit specified in mounting guide
/ system diagram. in case it is in doubt, consult your local traxon office or authorized
agent.
All fixtures must be installed in daisy-chain. do not connect fixtures as a star connection.
2.
Correct installation topology
fiG.4:
Data Injector
Data Injector
each data injector can connect up to 32 fixtures regardless of fixture length.
3.
each data injector requires one starter cable to connect to a daisy-chain of fixture.
4.
ensure there are enough data injector(s) and starter cable(s) for installation.
if the installation needs interconnection cable for additional length between fixtures, make
5.
sure the cable is available.
Make sure that all additional parts, supporting equipment and tools necessary for the
6.
installation are available. Check the planned physical layout of the installation in case it is
in doubt. in the layout, locate all data injectors and fixtures.
